Six kinds of DIY automotive air conditioning specific fault diagnosis
Fault one: hand feel air conditioning high and low temperature pipe fits normal, but the car does not feel cold. DIY Diagnosis: air conditioning is not a simple problem the problem may be in the air conditioning temperature control system Creader CRP123. Check the control cable heating switch is off check the heating valve is in the closed position. Before and after the touch valve , under normal circumstances should be ” close to the engine side of the high temperature, low temperature, close to the vehicle body side ” , as the normal contrast , adjust the heating switch to the off state, such as can’t be effectively cooled off replace the heating of water into the switch.

Fault two: Adjust the temperature knob feel the temperature does not change. DIY Diagnosis: wind deflector may be temperature controlled pull off, if shedding need reinstall adjustment; if you feel the outlet of the air volume is not big enough, indicating that the evaporator clogged, you need to disassemble the evaporator for cleaning.

Fault three: Touch air conditioning pipe, pressure pipe hot, low pressure pipe nor cold. DIY Diagnosis: This may be the compressor to frequent on-off phenomenon, especially in the case of high engine speed compressor does not pull, this time can’t avoid prolonged high speed engine, otherwise it will be very dangerous; addition, for the high-pressure pipe overheating, but also check whether there beneath the air conditioning compressor oil, if it proves compressor high pressure limiting valve has been damaged, you need to replace the compressor.

Troubleshooting four: Touch conditioning pipe, pressure pipe is low temperature but low-pressure pipe is high temperature. DIY Diagnosis: such a case the compressor can’t cycle effective to the refrigerant, the compressor may need to be replaced.

Failure Friday: between the condenser and radiator clogged by dirt, refrigerant overfilled. DIY Diagnosis: first removed dirt, as indeed no dirt clogging , check refrigerant confirm the observation window is too much , if you can see the liquid flow , but do not see any bubbles , then filling the refrigerant excessive, need to re- taking the time to do a standard raise.

Fault six: Start air conditioning and refrigeration system Launch X431, two electronic fans operate simultaneously, but the air conditioning pump does not pull. DIY Diagnosis: such cases require professional diagnostic circuit system, it is recommended to a professional repair station for repairs.

There many car diagnostic tools can help you test the problem, such as: Autel Maxidiag MD802 and MaxiDAS DS708. If you want know more about car diagnostic information and car diagnostic tool, please click the below site: Better Website

Related Links

Items You Should Always Keep in Your Vehicle
You can pack your auto repair toolbox with the best tools that money can buy, but all those fancy gadgets and gizmos won’t do you any good if they’re at home when your vehicle breaks down 30 miles from civilization. Don’t tempt fate: Keep basic tools and materials onboard at all times.
Besides car toolbox filled with the tools you need for quick repairs, be sure to keep the following items on board:
Rags: Keep a clean, lint-free rag in your vehicle to wipe your oil or transmission dipstick or to clean the inside of your windshield if it clouds up.
Spare parts: If you replace your spark plugs, save the old ones if they’re not too worn. Carry them in your trunk-compartment toolbox for quick replacements if necessary. The same goes for old air filters and other minor gizmos. A couple of extra nuts, bolts Launch Creader VI, and screws also are useful to have on hand.
Emergency parts: Carry a spare set of windshield wiper blades launch x431 diagun 3, an extra radiator cap, and extra fuses. If you plan to travel in hot weather in remote regions, top and bottom radiator hoses are a good idea. Although they’re more costly, it’s good to carry extra accessory belts.
Spare tire: Check your spare tire often. It’s humiliating to find that your spare is flat, just when you need it.
Lug wrench: A lug wrench is sometimes provided, along with a jack, on new vehicles. If you buy a lug wrench, get the cross-shaft kind, which gives you more leverage.
A can of inflator/sealant: This item saves you the trouble of changing a flat on the road. It attaches easily to the valve stem on your flat tire and inflates the tire with goop that temporarily seals the puncture.
Jumper cables: One of the most common automotive malfunctions is the loss of power to start the engine, either from an old or faulty battery or from leaving the headlights on by mistake.
Snow and ice equipment: If you live in a cold area, carry tire chains or a bag of sand. A small shovel is useful for digging your tires out, and a scraper allows you to clear your windshield of snow and/or ice. A can of de-icer is useful in icy weather.
Flashlights and reflectors: A flashlight in your glove compartment can help your kids locate dropped toys on the floor of the car, enable you to see under the hood if your vehicle breaks down, and serve as an emergency light for oncoming traffic if you have to stop on the road for repairs.
First-aid kit: Keep a first-aid kit in your vehicle. Choose one that’s equipped with a variety of bandages, tweezers, surgical tape, antibiotic ointment, something soothing for burns, and a good antiseptic.
Hand cleaner: Most hand cleaners are basically grease solvents.
Gloves: Keep a pair of gloves in the vehicle for emergencies. Industrial rubber gloves, available at swimming pool supply stores, aren’t affected by gasoline, solvent, or battery acid.

Related Links

6 Types of Windshield Damage
When a hailstorm hit Mississippi earlier this year, glass shops started working overtime at the state fairgrounds to help deal with nearly 50,000 auto insurance claims. While many of us may never witness that sort of widespread problem, a stone or road debris that gets kicked up on the highway can cause windshield damage. Here’s a rundown of the factors that can determine the extent of the damage to your windshield:
Types of Glass: Laminated
Laminated glass is used in automobile windshields, and consists of two sheets of glass with a layer of plastic sandwiched in between. While damage can occur, laminated glass will not shatter.
Types of Glass: Tempered
The side and rear windows of your car are probably made of tempered glass. Unlike the glass in your windshield, tempered glass is a single layer, but it’s also heat-treated to keep it from breaking into sharp shards. When tempered glass breaks, it shatters into small, dull, pebble-like pieces.
Assessing the Damage: The Impact Site
Glass shops refer to the area where the damage occurred as the impact site. Since your windshield is made of laminated glass, the impact site is usually on the outside layer of your windshield. (Photo: Flikr/runran)
Assessing the Damage: The Pit
If you pinpoint the exact location where your windshield was hit by an object x431 pro, you’ve found what repair shops call the pit. You can usually identify the pit because a small piece of glass will be missing as a result of the impact.
Types of Damage: Bull’s-Eye
Hitting the bull’s-eye isn’t a good thing if you’re talking about your windshield. This type of damage has a dark-colored circular shape with an impact hole.
Types of Damage: Half Moon (Or Partial Bull’s-Eye)
Like a bull’s-eye, a half moon has a darker color and an impact hole, but its shape isn’t completely circular.
Types of Damage: Crack
Cracks can happen on the inner or outer side of your windshield, and are characterized by a single-line separation in the pane of glass x431 v.
Types of Damage: Legs
Small cracks sometimes splinter out from a break in your windshield, which repair shops call legs.
Types of Damage: Star Break
Just like a bull’s-eye, a star break gets its name for its recognizable shape. You can identify a star break by its short cracks or legs, which shoot outward from the pit.
Types of Damage: Combination Break
When two different types of damage are in one spot, such as a star within a bull’s-eye, you may have a combination break.
A chip or break in your windshield glass can be a little like a snowflake: Each one can be different depending on what hit your windshield, and how it caused damage.
If you’ve got a damaged windshield it might make sense to have it replaced or repaired sooner rather than later, especially if it affects your visibility. As Edmunds points out,A rock chip or bull’s-eye right in your line of vision is a real irritation.

Related Links

Automotive diagnostic allows you to keep a new car
Every one of us hopes for possessing an ideal vehicle might be because possessing a vehicle feels great because it provides for us convenience, comfort and pleasure however possessing one means proper upkeep and upkeep of the automobile to retain its beauty and utility simultaneously.

Automotive repair services are a person’s that should keep the vehicle carrying out at it’s peek possibility of a lengthy time. Regular maintenance and repair of the used or new vehicle is of critical importance x431 v. This tip to keep your vehicle running within the condition that you would like determines the amount of time that the vehicle remains in good shape and doesn’t require extensive repairs. Particularly if you disregard the regular upkeep of your brand-new vehicle it will lose its potency soon by supplying warning symbols that need heavy expenditure out of your side to repair back things. Regular service and upkeep of a used or new vehicle can extend the existence and safety from the vehicle considerably.

Regularly altering the liquids inside a vehicle removes debris and grime that could clog parts within the engine. Additionally, your merchandise specialists will warn you once they see an issue with your vehicle that might need to be addressed. To keep safety and lower the price of vehicle repair, like a responsible vehicle owner it is crucial that you’ve your vehicle looked over regularly. In by doing this you are able to proactively take care of your vehicle and reduce the operating price of making major repairs later.

Because so many aspects of your vehicle can’t be looked over aesthetically, it is essential that you seek the help of a great auto technician and subject your vehicle to some diagnostic check-as much as determine whether every part are functional. A vehicle diagnostic device will help with identifying the issue areas inside your vehicle without needing to stomach your vehicle. If you’re searching for professional services for the dream vehicle you’ll be able to request the help of auto repairs in phoenix. There the constant maintenance of the vehicle ranges from fundamental vehicle maintenance for an overhaul or vehicle check-up done with the aid of an expert team of specialists who’re equally competent like Japanese auto service x431 diagun.

Once your vehicle needs repair automotive diagnostic tool– Launch CRP129, Launch Creader VIII is an extremely viable choice open to you to find the best outcomes of your vehicle. Failure to service your vehicle means costly auto repairs along with a stake on self security that is certainly not worth it.

Related Links

How to Remove Transmission Lines in a Radiator Shop
An automatic transmission in a vehicle pumps fluid through pressure lines to cooling tubes inside the vehicle’s radiator. The fluid is returned to the transmission for use in its operation, then is pumped back to the radiator and the cycle continues. When repairs necessitate the removal of the radiator from the vehicle, the transmission cooling lines should be removed in the radiator shop. The work involved in removing the transmission lines can be done in 15 minutes with the proper tools and basic automotive knowledge.
Things you’ll need
Protective eyewear
Wheel chocks
Penetrating oil
Two adjustable wrenches
Splash pan
Shop towels
Oil-dry compound
Instructions
1. Remove the ignition key from the vehicle and place the gear selector in the “Park” position launch x431 pro. Set the hand-brake and place wheel chocks on the rear wheels. Removing the key ensures that the engine will not be started while the work is being performed.
2. Open the hood of the vehicle and locate the transmission line connections. Some makes and models have the lines at the lower section of the radiator facing the engine, and others are located on either side of the radiator. The lines will be at least 3/8-inches in diameter and near each other.
3. Spray the connections with penetrating oil and allow the oil to work for 5 to 10 minutes creader crp129. Place a splash pan in position to prevent oil spillage on the shop floor.
4. Hold the brass union in place between the radiator socket and one of the transmission fitting nuts with an adjustable wrench. Place another adjustable wrench on the fitting nut and turn the nut in a counterclockwise direction.
5. Slide the loosened nut back over the transmission line and pull the line away from the brass union. Allow any fluid dripping to fall into the splash pan. Use shop towels and oil-dry compound as needed.
6. Repeat Steps 4 and 5 to remove the second transmission line.
Tips & Warnings
Transmission lines may not always be connected to the radiator with a brass union. Some lines use male fittings that screw directly into the radiator socket. Still others may be connected to the radiator with flexible pressure hoses secured with worm-drive clamps.
Follow radiator shop safety guidelines for proper disposal of old oil. Keep shop towels and rags in sealed metal containers marked for that purpose.
Always wear protective eyewear.

Related Links